Mytek Digital 2019 / Brooklyn DAC+ firmware version 1.25


To update Brooklyn DAC+ firmware to the latest revision an installed the Mytek Control Panel is required. The update can be performed on Windows 7,8,10 and OSX Yosemite / El Capitan / Sierra / High Sierra / Mojave.

IMPORTANT NOTE

If going from firmware 1.11 or earlier:
The firmware file "Mytek_BrooklynDAC+_firmware_v1.23_for1.11upgrade" must be uploaded FIRST to perform the update. Otherwise the DAC will not be programmed properly! 
When this fails please try again using the same file. If the update fails again use the "Mytek_BrooklynDAC+_firmware_v1.25.mfb" file (it may be necessary to use the procedure from "When the update fails" paragaph). 


How to update the firmware:

Start Mytek Control Panel application. The program ("General" tab / "Firmware" section) will show you the current revision of your unit, and whether it needs an update or not. If so, then simply press the "Load firmware file" button to find the desired firmware file. Next click "Update" button. A progress bar will indicate when the flash process is finished.The DAC will reset itself. Before using restore the Brooklyn DAC+ to factory settings. A reboot of the computer is not necessary.


When the update fails:

Press and hold the first from the left button and turn the Brooklyn DAC+ on. The DAC will start in Bootloader mode - "MYTEK" logo is fading in and out. The flash process should then be tried again.


Firmware revision history:

v1.25 / 2019-07-03

Important note #1: not possible to revert to previous version (1.11) if this firmware has been uploaded. 
Important note #2: "Mytek_BrooklynDAC+_firmware_v.1.23_for1.11upgrade" must be uploaded FIRST to perform the update properly when going from 1.11 or below.

	- fixed: checking integrity of serial numbers
	- internal stability improvements

v1.24 / 2019-01-31

Important note #1: not possible to revert to previous version (1.11) if this firmware has been uploaded. 
Important note #2: "Mytek_BrooklynDAC+_firmware_v.1.23_for1.11upgrade" must be uploaded FIRST to perform the update properly when going from 1.11 or below.

	- fixed: issue with USB 2.0 processor startup
	- fixed: communication issue with MCP app

v1.23 / 2018-10-11

Important note #1: not possible to revert to previous version (1.11) if this firmware has been uploaded. 
Important note #2: "Mytek_BrooklynDAC+_firmware_v.1.23_for1.11upgrade" must be uploaded FIRST to perform the update properly when going from 1.11 or below.

	- added: support for MQA HID via USB.
	- improved: cooperation between trim/gain, bypass, volume controll and inputs.
	- fixed: no SR update when turning the MQA decoder on and off.
	- added: designed by MQA custom FIR coefficients in ESS chip.
	- added: 'Allow bypass' tile in order to prevent the user from enabling the bypass accidentally.


v1.22 / 2018-07-03

Important note #1: not possible to revert to previous version (1.11) if this firmware has been uploaded. 
Important note #2: "Mytek_BrooklynDAC+_firmware_v.1.22_for1.11upgrade" must be uploaded FIRST to perform the update properly when going from 1.11 or below.

	- fixed: subtle drops in right channel on PCM (up from 192kHz) through USB
	- fixed: meters instability in higher DSD rates 
	- improved: USB transmission

v.1.21 / 2018-03-30

Important note #1: not possible to revert to previous version (1.11) if this firmware has been uploaded. 
Important note #2: "Mytek_BrooklynDAC+_firmware_v.1.21_for1.11upgrade" must be uploaded FIRST to perform the update properly.

	- fixed: crashing when simple screen is shown and DSD is playing

v.1.20 / 2018-03-14 

	- added: volume trim function independent for every input, for analog input it is gain also.
	- fixed: analog volume control bugs

v1.11 / 2018-02-02

	- added: theater bypass
	- added: headphones and speaker icons
	- added: "restore default factory settings" in Control Panel application
	- fixed: AES / DSD x128 (DoP) now works properly

v1.01 / 2017-12-07

	- improved: initialization of the sample rate
	- fixed: remote control now works properly

v1.00  / 2017-10-26

	- the first official release.

Copyright Mytek Digital 01/2019 All rights reserved. 
Windows 7/8/10 are trademarks of Microsoft Corporation.
OSX Yosemite, El Capitan, Sierra, High Sierra, Mojave are trademarks of Apple Inc.