Mytek Digital 2017 / Brooklyn DAC firmware version 2.36

Important notes:

To update Brooklyn DAC firmware to the latest revision an installed the Mytek Control Panel is required. The update can be performed on Windows 7,8,10 and OSX Yosemite / El Capitan / Sierra.


How to update the firmware:

Start Mytek Control Panel application. The program ("General" tab / "Firmware" section) will show you the current revision of your unit, and whether it needs an update or not. If so, then simply press the "Load firmware file" button to find the firmware file (Mytek_BrooklynDAC_firmware_v.2.xx.mfb). Next click "Update" button. A progress bar will indicate when the flash process is finished.
The DAC will reset itself. Before using restore the Brooklyn DAC to factory settings. A reboot of the computer is not necessary.


When the update fails:

Disconnect power cord. Press and hold the first (from the left) button and connect the power again. The DAC will start in Bootloader mode - the logo will start blinking. The flash process should then be tried again.


Firmware revision history:

v2.36 / 2017-07-06

	- improved: USB audio class volume control on Windows

v2.35 / 2017-06-12

	- changed: remote type name from "NEC" to "Apple"
	- added: USB VOLUME tile to enable audio class volume / system volume
	- improved: rewritten RC5 module	 
	- fixed: small bugs in Apple and RC5 pilots in Remote.c, Remote.h
	- fixed: SDIF inputs work with DSD x64, x128, x256 properly
	- improved: WCK sync on USB	

v2.34  / 2017-05-16

	- changed: new MQA indication

v2.33  / 2017-05-08

	- fixed: playback failure on osx
	- added: mute to "HID" volume control
	- added "HID" volume control

v2.32  / 2017-04-27
		
	- fixed: DC offset on Linux
	- fixed: Meters in DSD mode
	- added: serial number validation

v2.31  / 2017-04-20
	- reversion to old MQA indication (added magenta logo for MQA Core)

v2.30  / 2017-04-12

	- fixed: Nec receiver fixed.
	- improved: larger fonts on simple screen added
	- improved: new MQA decoder with new communication scheme
	- fixed: improved USB frequency switching

v.2.22 / 2017-01-13
	- fixed; display artefacts removed 

v.2.21 / 2016-08-30 

	- fixed: wrong Bit rate shown on the display
	- improved: USB playback

v.2.20 / 2016-07-27	

	- new function Mastering PCM (Mono, L-R, MS)
	- new function Mute      
	- new function Phase
	- new function Main Balance
	- fixed 192kHz playback issue.

v.2.13 / 2016-06-30

	- fixed stuttering playback on El Capitan

v.2.12 / 2016-06-24

	- minor bugs has been fixed

v.2.11 / 2016-06-23

	- new function usb recording from all digital inputs simultaneously 
	- improved dsd playback (clicks)

v.2.10 / 2016-06-22

	- new function display brightness
	- new function display auto off
	- new function auto return to simple screen
	- new function tiles color same as device color
	- new function input change is shown on the simple screen for 2s  (e.g. input source change). After change param information about it is shown in place of frequency/mode/bits
	- fixed recording

v.2.09 / 2016-06-17

	- fixed clicks occured when native dsd playback started or stoped

v.2.08 / 2016-05-19 
    
	- fixed dsd level
	- fixed meters indications for dsd. 
	- minor bugs were fixed

v.2.07 / 2016-05-15

	- new function white colour added
	- colour names added 
	- Mytek Control Panel colours adjusted 
	- new function standby diode brighness added; now the logo can be turned off in standby mode

v.2.05 / 2016-04-11  
   
	- fixed showing "no lock" when mqa is enabled
	- fixed slow changing of synchronization settings

v.2.04 / 2016-04-10   
  
	- added auto power on mode (device start after power up in last state - standby or work)
	- changed starting screen, new one contains mytek logo and loading animation
	- changed shutdown screen (before standby), new one contains text "Standby" and animated icon
	- added to standby screen text "press knob to start"
	- added delayed display power off - text "press knob to start" is shown by 10s after enter to standby
	- added infinity character in volume control and meters
	- cleaned up fonts code and names
			
v.2.00 / 2016-04-04	

	- MQA decoder enabled
	- Added PCM filter settings
	- Added DSD filter settings
	- Added ESS reset in standby
	- Added ESS soft mute during clock source/input source change
	- Switched off i2s clocks in standby
	- Fixed bug with noise and bit meter's wrong readings after wakeup

v.1.45 / 2016-02-12	

	- changed max display's current to 140% of nominal.
	- Added dynamic gamma table generation (based on parameters) and picked out the best values of those parameters. 

v.1.44 / 2016-02-08	

	- fixed dropped playback on osx El Capitan at 192kHz. 
					
v.1.43 / 2016-02-07
	
	- usb playback on osx work properly for every input sources. 
					
v.1.42 / 2016-01-15
	
	- Fixed aes bugs: temporary no data on active aes when changing fs

v1.41 / 2016-01-13
	
	- fixed 48.0k and multiplies playback on osx.
	- MQA temporarily set to off
			

Copyright Mytek Digital 7/2017 All rights reserved. 
Windows 7/8/10 are trademarks of Microsoft Corporation.
OSX Yosemite, El Capitan, Sierra are trademarks of Apple Inc.